Shrink Fit Hook Drive Gear Singer 700 Series
3
Reviews
Customer score 100%
This is the shrink fit gear for the Singer touch-and-sew 700 series sewing machine. This gear is a direct replacment for the gear that is left to on the hook once the hook is removed from the machine. With a little force the original gear can be removed from the hook and this gear can be pushed in to its place. Free UK delivery on all orders over £30
In stock
SKU
BLB508
£14.00
This gear fits onto the hook shaft, it is attached to the hook. There are no screws to hold it in place, it is a shrink fit gear.,We highly recommend you take your machine to a qualified engineer or someone with a high degree of competence fit the gear.
| Brand | Singer |
|---|
Customer Reviews
-
Delivery was within 48 hours of placing the order. Instead of hacksawing the toothless gear boss, I used a mole grips to securely grip the old gear and then gently and with care tapped the hook through the gear boss. There was no pin evident on the boss. I fitted the new gear by following the tips kindly provided by the previous reviewers.
-
I found the hook gear quite simple to fit, but I did have to remove the centre part of the old gear which had disintegrated into many pieces. After I had carefully cut away the old centre, I placed the hook into a small polythene bag, and placed it in the freezer. I am lucky that I have a Rayburn cooker, so I could place the gear in the lower oven and warm it up. Once the parts were ready, about an hour, I quickly placed the the hook onto a brass block which supported the centre part only and then placed the new hot gear onto the end of the shaft. I then used a brass tube over the gear and tapped it down the shaft until it was tight down on the base. Simples.
-
Delivered within 48 hours, was the part required. Described as 'shrink fit', actually a press fit, quite easy. Getting the old gear off was more difficult, as there was a roll pin through the hook into the drive gear boss. Cut down through the boss with a junior hack saw, turn through 90 degrees and then cut again.Repeat once more and the bits should twist off.
Write Your Own Review
FREE deliveries on all sewing machines within the UK mainland excludes highland, Islands and weekends.
Under £30 - delivery starts at 0.99p (weight/size dependent)
Over £30 - delivery is free in UK mainland
Small Items:
We use Royal Mail post for all small/med packages which are sent out same day where possible if ordered before 1 pm.
Usual delivery timescale 2-4 days. (7-14 days Airmail outside the UK)
Larger Items: Sewing machines, overlockers.
Free UK main area next working day insured delivery.
We use DPD, UPS, UK Mail and Parcel Force with pick-ups twice a day. UK next working day delivery for large items which are usually shipped the same day where possible if ordered before 1pm.
- We can deliver on Saturday or Sundays as well as any week day.
- With a 15 minute time window.
COVID-19 UPDATE:
This is an update for all of our customers during the Covid-19 lockdown.
While our websites are still online and accepting orders, both ourselves and our suppliers are operating with reduced numbers of staff.
This is to allow for social distancing measures to keep our staff as safe as possible. We are working extremely hard to ensure that all of our customer's orders are dispatched as soon as possible.
Please be aware that delays in shipping may happen during this uncertain time.
While courier companies are making every effort to deliver within a standard operating time frame, this is not always possible.
Should you need to contact us, please consider using our online contact form. Please remember we are working tirelessly to provide you with an ongoing service during this pandemic. Thank you for your continued support and patience. Stay safe.
There could be delays caused due to circumstances beyond our control but we will do what we can to limit these and ensure you get your order as quickly as possible.
Non standard & further detailed delivery information can be found here. All delivery time-scales are given as a guide only.
