January Sale

Steam Press Cover For Singer ESP2, MSP7 Irons

Availability: In stock.

£9.99
OR TELEPHONE 0191 2525825
Product code: (284137000)
Singer Steam Press parts - Shaped sliver Teflon coated cover with draw strings for the ironing board. Board size 60x24 cm for most steam presses. Free UK delivery on all orders over £25
Steam press cover
Suitable for Singer models MSP7, ESP2, MP4,
  1. Product review by Sakina from Glasgow on Tuesday, September 12, 2017
    Overall rating

    It was a bit difficult to tie but I managed.
    The foam and cloth were big but I didn't cut it and managed to get it all under the top silver cover

  2. Product review by Lisa Glaze from Highland on Sunday, August 27, 2017
    Overall rating

    A bit difficult to tie

  3. Product review by LYNDA THOMSON from Inverness-shire on Sunday, August 27, 2017
    Overall rating

    Replaced the foam padding and the cover for my Singer ESP2 was was purchased from Singer last year (2016). Its an excellent steam press for using on a daily basis for a self catering business. And delivery was very quick - so will always use Singer for my ironing needs!

  4. Product review by Erika from Launceston Cornwall on Thursday, July 27, 2017
    Overall rating

    Arrived very quickly. It was good timing as I had just finished my washing and drying for my glamping business. I thought I was going to have to use my small iron so I was quite relieved when the cover turned up.
    Many thanks

  5. Product review by Alan L from Scotland on Friday, April 21, 2017
    Overall rating

    The cover is perfect and fits well - the only drawback is the very fine drawstring which cuts into your fingers a bit as you tighten it - this is a minor complaint - overall a satisfied customer.

  6. Product review by Marie Dooley from Crossmaglen on Saturday, February 18, 2017
    Overall rating

    Product arrived punctually.
    I found the cover difficult to gather the sides to fit the iron press as the chord was very fine and I could only pull from one side. I eventually got it sorted and it fits well and looks clean and bright

  7. Product review by Hazel Gookey from Luton on Tuesday, December 13, 2016
    Overall rating

    Product as expected, apart from the tie string being very thin. Very prompt service and delivery.

  8. Product review by Ju from Cornwall on Wednesday, November 9, 2016
    Overall rating

    Efficient, quick service. Product same as original. Overall very pleasing.

  9. Product review by Catharine Frain from Torquay on Friday, October 21, 2016
    Overall rating

    Great item, fitted very well and makes machine work better...thank you

  10. Product review by Rob from Toronto, Canada on Wednesday, September 7, 2016
    Overall rating

    Very nice product and quick delivery to Canada.

  11. Product review by Pauline Povey from Aldershot, Hants on Saturday, July 2, 2016
    Overall rating

    String too flimsy. When tying on to the machine the string results in an a knot you cannot untie.

  12. Product review by Betsy the Spinner from Devon on Monday, April 25, 2016
    Overall rating

    The Teflon cover works really well and it fits my ESP2 cover like a glove. As everyone has pointed out, the gathering 'cord' on it is rubbish – it is more of a thread than a cord and for that reason it is quite hard to pull up tight. It is about as thick as four strands of embroidery cotton. Having said that, once the thing is in place you hopefully won't need adjust the fit, so the pathetic nature of the 'cord' isn't a problem. If it does break, just replace it with something stronger. The casing is quite large so that shouldn't be too difficult.

  13. Product review by Vade from Sheffield on Monday, February 29, 2016
    Overall rating

    Needs a more visible and substantial drawstring. I rethreaded the drawstring from the previous cover. At first it was not obvious that the replacement cover was the appropriate size, but it was.

  14. Product review by Barnowl56 from Aylesbury on Tuesday, November 10, 2015
    Overall rating

    Speedy delivery much appreciated as my old cover had just about fallen apart. Would be good if some way the pull cord could be thicker as always feels as though it is cutting into your fingers when pulling it tight to fit. Once secured trimmed off the excess cord as too much to tuck away. New cover always feels slightly rough for first few uses then it settles into a smooth finish. Will order again when needed.

  15. Product review by A Goodburn from London on Tuesday, September 22, 2015
    Overall rating

    Good product. Good service.

  16. Product review by Susan Woods from Bishops Storford on Tuesday, August 18, 2015
    Overall rating

    Delivery Singer very quick - ironing cover fits very well and does the job, I have tried others and this one lasts longer. Only one small thing - the draw strings when tying it up would be nice to have a clip to secure it and tidy it away.

  17. Product review by John Clark from Plymouth on Friday, August 15, 2014
    Overall rating

    The Steam press cover arrived exactly as requested and fits the press. I would have also ordered the cloth and foam at the same time. I later telephoned the company and was told what was needed they were very helpful.

  18. Product review by M Pritchard from Somerset on Tuesday, September 3, 2013
    Overall rating

    Many thanks for sending, I feel I now have a new press with excellent cover and foam.

  19. Product review by Elly from London on Thursday, June 7, 2012
    Overall rating

    I was very impressed with the speed of delivery, & the quality of the covers, as l had brought some from another company & they were not as thick & only just covered my press, plus the reflective material is good for the end result on lovely pressed clothes,would def order from you again , thankyou :-)

  20. Product review by Budgie from YORK .UK on Sunday, May 13, 2012
    Overall rating

    Very good product, the one it replaced was the original bought with the Iron.

  21. Product review by BETHAN DAVIES from Pembrokeshire on Thursday, May 3, 2012
    Overall rating

    Easy to apply, with a good strong string to tighten for a compact fit. A slightly rough feel to the fabric initially, but after just a couple of uses it becomes nice and soft. It arrived in the post the following day.

  22. Product review by dyfed from Pembrokeshire on Thursday, May 3, 2012
    Overall rating

    The steam press cover is easy to replace and fits very compactly around the press. It arrived the next day by first class mail. Excellent service.

  23. Product review by Rosemary Bowen from Dunstable on Thursday, July 21, 2011
    Overall rating

    Very pleased. It fitted well. Not as soft as my original cover, but I managed to burn that so I am hoping that this will be better !!


Write a review and share thoughts with others.

Steam Press Cover For Singer ESP2, MSP7 Irons review.

Please leave us a star rating and a product review?
  1 star 2 stars 3 stars 4 stars 5 stars
Overall rating