GO


How to use an Automatic needle threader

The important thing is that the needle must not be slightly bent..

1. Put a new size 90 needle in the sewing machine.

2. Make sure the needle is at its highest point, before using the threader.

3. Pull the needle threader fully down and twist it, so the tiny hook of the needle threader goes through the needle eye.

4. Use the plastic hook on the left of the threader as a guide, while you push the thread against the needle (near the point) and move it up the needle until it reaches the stop bars, then slowly let the needle threader twist backwards out from the needle and it will spring back to its resting position.

5. Catch the loop of thread from the back of the needle.

This technique does need a little practice and is much easier then the description above.

Other Answers in the Category "Sewing Machine Troubleshooting Guide"